Whippet I/H Frame: Parts, Build Review, Tuning, LOS, & FPV!

Video Channel
Please help us to find bad videos. Broken or unappropriated video content?
The Whippet I/H Frame from Detroit Multirotor is probably the best thought-out frame I've seen. Every component seems to have its place and fits easily on the body. The "stretched X" (or "H") shape makes its pitch/elevator feel much more in-control and makes this quad look different than most of its competitors. The LOS flying is a different experience too. It rolls more quickly than it flips.
======================================================
This is flying with EMAX 2600kv motors and LittleBee 30amp ESCs. You can build your own identically to the one in this video using these parts:
Whippet I/H Frame (request red 3D printed parts!):
EMAX RS2205 2600kv Motors:
LittleBee 30amp ESCs:
SP Racing F3 Flight Board:
PDB In the video:
Preferred PDB (better layout):
ET200R Video Transmitter:
700TVL 2.8mm:
Video Antenna (L Type RP-SMA):
Receiver Antenna Holder:
Piezo Buzzer (lost model alarm):
DAL 5045 3 Blade Props:
4inch/100mm zip ties
Taranis Transmitter (Mode 2, throttle on the left):
Naked X4R-SB Receiver:
Bonka 1500 mAh 4S 75C Lipo Battery: /
Infinity 1300mAh 4S 70C Graphene Lipo Battery:
4xESCs+4xMotors+10 Props bundle:
Mydroneparts.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user, if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.

Latest new videos

See all

Latest products

Latest views