iFlight SucceX-D Mini F7 TwinG Stack (F7+40A ESC) for DJI Air Unit FPV Racing - 76.00 €

iFlight SucceX-D Mini F7 TwinG Stack (F7+40A ESC) for DJI Air Unit FPV Racing
Seller: Banggood,
Ship from: CN Warehouse, Usually dispatched in 1-3 work days.

FREE SHIPPING: 10-35 days. (DHL faster please check price/quantity first)
Free shipping aviable, Registered postage from 25 €




If you use your own DJI Remote Controller, you MUST update your firmware betaflight_4.1.0_STM32F7X2 configurator betaflight to 10.6.0 to set up and bind your DJI remote controller.

  • Model 1 setup: Reveiver tap -----> Choose “Spektrum / Graupner / JR (TAER1234)”
  • Model 2 setup: Reveiver tap -----> Choose “Frsky / Futaba / Hitec (AETR1234)”


The SucceX-D Mini F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things as simple as possible, we have included a connector specifically for the DJI air unit, so installation should be a breeze. In addition, we add the popular and reliable USB Type-C instead of Micro USB which makes the connection easily.


• Universal USB Type C connector instead of micro USB

• Plug-and-Play. No need to solder tiny wires.)

• Supports BLHeli pass-through for easy ESC upgrade and configuration.

• Designed to support DJI Digital FPV.

SucceX-D F7 TwinG SPECS:

-MCU: 216MHz STM32F722

-Gyro: TwinG ICM20689

-Blackbox: 32MB

-Betaflight OSD: YES

-BEC: 5V 2.5A

-9V 2.5A 18W Design for DJI FPV Air Unit

-Uarts: 5

-ESC Telemetry: UART5

-INA Pad:nuart2

-Input voltage: 2-6S,MAX 8S


-CLI dump file: IFLIGHTF7_TWIN_G.config

Size:27*27mm /20*20mm φ3 mounting


- Mounting hole: 20*20mm, φ4mm with Grommets φ3mm

-Size: 31*31mm

SucceX Mini 40A ESC SPECS:

- MCU: STM32F051K66

- Current Sensor: Yes

- Input: 2-6S lipo

- Telemetry: Yes

- Installing Hole: 20x20mm, M3

- Target: iFlight-BL32-4IN1

- BLHeliSuite download :http://www.mediafire.com/file/hkln8fcaif5s9l8/BLHeliSuite32_32616a.zip/file

- Constant: 40Amps

- Burst: 45Amps

- Weight:16.7g

- Dimensions: 31*31mm(including the power pads)

- Mounting Holes: 20*20mm,M3

- Supports Dshot1200,Proshot,Oneshot,Multishot

Package included:

-SucceX-D Mini F7 TwinG FC x 1

-SucceX 40A BLHeli_32 4-in-1 ESC x 1

-DJI compatible harness cable x 1

-Stack mounting screws and dumpers and nuts,cable

NOTE:The stack is not included DJI Air Unit

Add Comment